Three Circle Knives Satori Tanto – Video Review

Three Circle Knives Satori Tanto Review

Review – Three Circle Knives Satori Tanto

(Video Review – Click Read More For Full Article Including Video)
Three Circle Knives Satori Tanto

Black Cerakote Finish – Satori Tano by Three Circle Knives

If there is one tool that I’m always excited to update it’s my knives. Being an avid outdoors enthusiast, hiker and backpacker your tool is arguably your most precious tool. I’ve had the enjoyment of using the Satori Tanto knife from Three Circle Knives for the past few months and I must say it is a solid blade and one that I will be keeping in my backpack for years to come. From the unboxing of the knife to the field, I have been so impressed with this knife that I was giddy to film a video review. I generally use products for 2-6 months before recording or writing a review so I have been patiently using and abusing this fine piece of craftsmanship in the interim.

Three Circle Knives - Satori Tanto

The Satori Tanto knife is forged from 440c .25″ steel and is cerakoted in black (also called “shadow”) and the handle is wrapped in a desert camo 550 paracord forming a comfortable grip around the handle. Some obligatory specs for the blade from the Three Circles Website:

Specs

  • 12″ overall, 6.5″ blade Tanto
  • Cerakote in Black
  • .25″ thick 440C Steel
  • Kydex Sheath
  • Multiple Carry Options: Paracord or MOLLE Clip Paracord Options for handles: Black, Coyote Tan, Olive Drab, Gray, Maroon, Military Green

Phlster – New J-Frame Holster – The City Special

The city Special J Frame Holster by Phlster

The City Special Holster

The City Special – J-Frame Kydex Holsters by Phlster

The folks over at Phlster have just released a new holster today called “The City Special” which is a custom Kydex holster for those J-frame .38 special carriers out there. Now, there are two different holster they are making. One is a standard kydex holster with the signature single loop. This is ideal for a backup gun or even a primary carry.The City Special Holster by Phlster The second holster has a unique cut out so in the event you would have to reload with one hand, you can actually use the holster you hold the firearm sideways to deploy a speedloader or speed strip with new rounds into the chambers, close the cylinder and get back to business. It’s a unique way of solving a problem. I’ve written about the Phlster holster for my Glock 19 and I have been enjoying Phlster products since.

I personally don’t own a j-frame revolver simply because I just haven’t bought one. Recently my brother purchased an airweight and ever since I’ve been feeling the itch to buy my first wheel fun. Now that I know there is an awesome holster out there for it I think it will make my decision that much easier. I will be eager to see how the market likes the holsters as they were just announcing the release of them today.

 

 

HSGI ARMORDILLO Discreet Case V2 Review

HSGI Armordillo Discreet Case V2

Review of the Discreet Carry Case Version 2 by HSGI

HSGI Armordillo Discreet Case V2 Review

So I’ve been on the hunt for a new laptop / messenger bag for the past few months and finally decided on the Armordillo Discreet Case V2 by HSGI. It’s definitely a “man purse” for me as I carry a lot of crap on a daily basis. In my laptop case I am usually hauling a Macbook Pro, iPad, notebooks, Bose QC-15 headphones in their bulky case, spare contact lenses, glasses, pens, flashlight etc.

In the recent months I have destroyed my Swiss Gear messenger laptop bag. The stitching came undone six months ago and I’ve just been hobbling along looking more and more ghetto everyday. I finally retired it once I got this jewel in the mail. I’ve been using it for the last few weeks and so far have been very happy with it.

IT doesn’t have the water bottle holders on the side or the magazine pouches like the previous model, the V1 but it does offer plenty of storage, safe keeping for a laptop computer and allows for a 13.5×15.5 inch plate if you so decide to have a plate carrier / messenger bag. Below is a video review of the bag.

Take a Look at the case on High Speed Gear’s website here.

Notkocher M71 Stove Review (Video)

Notkocher 71 Stove Review

The Swiss Army “Notkocher 71” Stove Review

 

Notkocher 71 Stove Review

I like to cruise through my local Survival store and see what kind of new gear I can try out. I came across this little denatured alcohol gel Swiss Army stove called the “Notkoher 71 or M71” and thought I would give it a test drive. From my online research “Notkocker” is pronounced as “not-ko-her” and is German for “emergency cooker”. I could be wrong on that so please correct me if I’m wrong.

I picked this particular stove up with the thought that it could be a great backup stove to my ISOPRO MSR Pocket Rocket which is my trusty standby when I”m out on the AT or Benton McKaye trails in North Georgia. I believe I only spent about $5.99 for this little green can of mystery and I always like to test new items out at home before taking them out and using them, even if it’s a simple little gel stove.

The Notkocher 71 weighs in at 5.9 ounces or 170g and measures 7.5 CM in diameter and 5 CM in height. it comes with a flexible top mounting stove that can also be stretched out to be used on your typical Sterno stove but I haven’t tested that out just yet. The burn time for 9 ounces of water in a stainless steel can with no lid was 6 minutes and forty seconds (6:40 rolling boil) and has a minimum of 45 minutes total burn time. Some people in forums have claimed more than two hours total burn time from one can. I am still tracking my time and will revise this post when I finally burn the whole can out.

Midwest Industries AK Mini Dot Mount + Primary Arms MD06

Midwest Industries AK Mini Dot Mount Primary Arms MD06

Optics & Mounts – Oh My! (Video Overview)

AK47 Mini Dot Mount - Midwest Industries

So I’m always on a quest seeking the best optics and mounts for my rifles. Finding a suitable but yet affordable option for my AK47 has been a bit of a challenge. I started off using the NCStar dust cover with picatinny rail mount and put a cheap sightmark red dot on it. That worked for about 50 rounds and then it started to become unstable and also made for a weird balance when holding the rifle. I also didn’t like the fact how easily you could lose zero simply because the action of the carrier slid right underneath the red dot with every trigger pull with a lot of energy.